Skip to content
EarthQuaker Devices Gary Automatic Pulse Width Modulation Fuzz and Dynamic Natural Overdrive Pedal

EarthQuaker Devices Gary Automatic Pulse Width Modulation Fuzz and Dynamic Natural Overdrive Pedal

by EarthQuaker Devices
SKU M00010346
$399.99
$399.99 - $399.99
$399.99
$329.00
$329.00 - $329.00
$329.00
Or Rent From
$3.00 per weekReturn any time after minimum rental agreement
Apply NowLearn MoreApply to Purchase Info

Have a Trade In?

We often accept trade ins towards new products!
Let us know what you would like to trade in via our trade in form.

EarthQuaker Devices is proud to introduce you to your new best bud, Gary. This little big guy was dreamt up by the one and only Lee Kiernan from the band IDLES!

Gary’s right brain consists of a dynamic and destructive fuzz, a ripping tone with an envelope-controlled variable pulse width that can be controlled by an expression pedal. Gary’s left brain is a natural sounding overdrive based on the green channel of the original Gray Channel that keeps your tone lively and drives your amp crazy.

Controls

Go: Gain control for the overdrive. Turn this up to increase the opamp gain to a thick and full distortion, or turn it down and turn up That’s It to use it as a clean boost.

That’s It: Master volume for the overdrive side.

Left Footswitch: Overdrive

Yes!: Sets the sensitivity for the envelope that controls the duty cycle for the square wave fuzz. The envelope is highly dependent on the level of the incoming signal, which can be affected by any gain pedals in front of Gary, pickup strength, source instrument, etc.

Oosh: Master volume for the fuzz side.

Right Footswitch: Fuzz

Specifications

Dimensions
4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs

Current Draw
20 mA

Fuzz
Input Impedance: 1 MΩ
Output Impedance: <1 kΩ

Overdrive
Input Impedance: 500 kΩ
Output Impedance: <1 kΩ

TRS expression pedal wiring

Tip: Wiper
Ring: +3.3V
Sleeve: Ground

Flexi-Switch® Technology

This device features Flexi-Switch® Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

• For standard latching operation: tap the footswitch once to activate the effect and then tap again to bypass.

• For momentary operation: hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Artwork -Artwork by Charlotte Gosch,

For more information, visit our warranties page.

Shipping: 

Shipping costs are calculated during checkout. Enter your shipping address in the checkout to view the shipping options for your purchase.

Note: Please ensure all address details are accurate, or select your address from the dropdown suggestions that appear once you start typing. Incorrect details may cause shipping options to be incorrect or not appear at all.

If you are unsure about the shipping cost, please do not hesitate to contact us.

Click and Collect Orders: 

Once your order has been processed, you will receive an email informing you that your order is ready for collection.

Note: Click and Collect orders are usually processed the same or next business day of purchase. If you have not received an email and it is not in a junk/spam folder, feel free to contact us for an update.

x

Found a better price elsewhere?

Let us see if we can challenge the price you found

Close
(+61)
No file selected
Upload a screenshot or an image
Close